Table frame
- Base frame made of sturdy square steel tube (35 x 35 mm)
- Table legs can be dismantled
- Table frame colour: light grey (RAL 7035) or water blue (RAL 5021)
- Table height: 780 mm
Optional:
- Height adjustable from 720 - 900 mm with clamping screws
- Reinforcing frame
- Mobile work table with 4 swivel castors
- ESD version with fully conductive worktop
- Earthing system with 2 push-button connections (10 mm) and safety resistors in accordance with IEC 61340-5-1
- All metal parts conductive powder-coated
Table top
- 27 mm thick, light grey (RAL 7035), with resistant edging all round
- Worktop optionally in standard or ESD version, each with two different table covering variants
- Lightly textured and glare-free surface
- Resistant to organic solvents, weak acids and alkalis, petrol and oil
Directly coated panel
- Melamine resin direct coating, limited abrasion and scratch resistance
Hard laminate (EN 438)
- Very hard and abrasion-resistant HPL laminate
- heat-resistant up to 180°C for short periods
Directly coated ESD plate
- Melamine resin direct coating, limited abrasion and scratch resistance
- Volume conductive carrier plate
- Leakage resistance RA 7.5 x 10⁵ to 1 x 10⁹ Ohm (dry measurement according to IEC 61340-5-1, 100 V)
Conductive ESD hard laminate (EN 438)
- Very hard and abrasion-resistant, conductive HPL laminate
- Volume conductive carrier plate
- Leakage resistance RA 7.5 x 10⁵ to 1 x 10⁹ Ohm (dry measurement according to IEC 61340-5-1, 100 V)
- heat-resistant up to 180°C for short periods
Work table with basic equipment
- Frame made of sturdy square steel tube (35 x 35 mm)
- Standard height: 780 mm or 720 - 900 mm adjustable
- Work surface can be loaded with 150 kg uniform surface load
- Optionally in standard or ESD version with continuous conductive worktop
- each with 2 different topping variants
- Earthing system with 2 push-button connections (10 mm) and safety resistors in accordance with IEC 61340-5-1
- All metal parts conductive powder-coated
Work table in reinforced design
- Frame made of sturdy square steel tube (35 x 35 mm) with reinforcing frame
- Standard height: 780 mm
- Work surface can be loaded with 200 kg uniform surface load
- Optionally in standard or ESD version with continuous conductive worktop
- Table top optionally in standard or ESD version, each with 2 different covering variants
- Earthing system with 2 push-button connections (10 mm) and safety resistors in accordance with IEC 61340-5-1
- All metal parts conductive powder-coated
Mobile work table in reinforced design
- 4 swivel castors (Ø 100 mm), 2 swivel castors with brakes
- Frame made of sturdy square steel tube (35 x 35 mm) with reinforcing frame
- Standard height: 780 mm
- Work surface can be loaded with 200 kg uniform surface load
- Optionally in standard or ESD version with continuous conductive worktop
- Table top optionally in standard or ESD version, each with 2 different covering variants
- Earthing system with 2 push-button connections (10 mm) and safety resistors in accordance with IEC 61340-5-1
- All metal parts conductive powder-coated
DE
